17
6.1 Connection of the device
•
Use high-quality F connector coaxial cable with at least
90
dB
shielding.
•
Connect the LNB connections of the multiswitch (3, 4, 6, 7)
with the LNB outputs of the satellite dish as shown in the
following
table:
Multiswitch
Quattro-LNB
Quad-LNB
13 V / 0 kHz
LNC A
Vertical / Low
any
18 V / 0 kHz
LNC B
Horizontal / Low
any
13 V / 22 kHz
LNC C
Vertical / High
any, need 22 kHz generator
18 V / 22 kHz
LNC D
Horizontal / High
any, need 22 kHz generator
Tab. 3:
Device connection
•
Connect the outputs of the multiswitch (1, 8) with the cables
that lead to the individual receiver antenna sockets.
(See Fig. 4)
TV and radio reception via a terrestrial antenna:
•
Connect the antenna output with the input marked
„TER“ on the multiswitch (5) for the terrestrial antenna.
There are 2 possibilities for further connections:
1. Either via a satellite-enabled antenna socket to receiver.
The input also enables power supply of the antenna
preamplifier for current up to 100mA. The
preamplifier is automatically disconnected from mains
voltage by an internal fuse when consumes more than
100
mA.
2. Or connect the multiswitch directly to a receiver.
Summary of Contents for 67178
Page 42: ...42 Istruzioni per l uso...
Page 43: ...43...