14
EN
6 Function buttons and status indicators
The fan has 5 function buttons and 12 status indicators.
In the following table, the function buttons and the status indicators are explained.
Function buttons
Designation Description
ON/SPEED
Press the button to switch on the fan. Press the button again to select the pow-
er level.
SWING
Press the button to switch the oscillation function on or off. When the oscillation
function is switched on, the fan moves from side to side.
MODE
Press the button to set the desired mode. You can choose between the modes
NORMAL, NATURAL and SLEEP.
TIMER
Press the button to activate the timer function. Press the button again to extend
the duration of the timer function.
You can set the timer function at half-hour intervals (0.5h, 1h, 1.5h, 2h, 2.5h, 3h,
3.5h, 4h, 4.5h, 5h, 5.5h, 6h, 6.5h, 7h, 7.5h).
After the set time has elapsed, the fan switches itself off. To end the timer func-
tion, press the button until all status displays for the timer (4H, 2H, 1H, 0.5H)
have gone out. Alternatively, you can switch the fan off and on again to clear
the set timer.
OFF
Press the button to switch off the fan. The set power level and mode remain sa-
ved and are active when you switch the fan on again.
Status indicators
POW
When the status indicator lights up, the fan is connected to the mains.
SLE
When the status indicator lights up, the SLEEP mode is active. The fan runs a
programme of different fan speeds.
NAT
When the status indicator lights up, the NATURAL mode is active. The fan is
running a programme of different fan speeds.
NOR
When the status indicator lights up, the NORMAL mode is active. The fan is ge-
nerating a steady flow of air at the set power level.
SW
When the status indicator lights up, the oscillation function is activated.
H
When the status indicator lights up, the power level H is set. The fan generates
strong airflow.
M
When the status indicator lights up, the power level M is set. The fan generates
medium-strong airflow.
L
When the status indicator lights up, the power level L is set. The fan generates
light airflow.
4H, 2H,
1H, 0.5H
If one of the status indicators lights up, the timer function is active for the spe-
cified time. If several of the status indicators light up, timer function covers the
sum of the active time intervals.
7 Remote control
7.1 Activating the remote control
•
Pull the contact protector out of the battery compartment (20).
The remote control is now activated.
