EN
- 4 -
User Manual
HDMI™/4K2K 7.1 audio extractor
Goobay
®
by Wentronic GmbH | Pillmannstraße 12
38112 Braunschweig | Germany
REV2020-09-04
V2.0 aw
Subject to change without notice.
58967
Power LED is illuminated when the unit is connected with power supply
and
the
HDMI™/4K2K 7.1 Audio Extractor is on.
Link LED is illuminated, when data of the source device are transferred
to the output device.
DVD or Blu-ray player
Amplifier
7.1 Loudspeakers
4.2 Operating
1.
Set the selection switch (6) to the preferred audio modus:
a.) "TV":
The HDMI™ singnal is looped through unchanged.
The Extended Display Identification Data (EDID)
feature advises the HDMI™ ouput device which
audio
format
is
supported.
b.) "Bitstream": The EDID of the HDMI™ output device is limited by
the
HDMI™/4K2K 7.1 audio extractor to a 5.1 audio
signal. This setting should be used when using the
optical audio output (9).
c.) "LPCM 7.1 CH": The audio settings of the EDID will be replaced by a
7.1 audio signal through the HDMI™/4K2K 7.1 audio
extractor. This setting should be used when using
the analog audio outputs (11 - 14).
PCM-LED (3) is illuminated when the output audio EDID is switch to
LPCM 7.1 CH.
2.
Check the audio setting at your output device, if no sound is heard.
Depending on the input audio format, the unit may not output audio sig-
nals through all output ports. For Example, the optical output port will
get no audio signal input when the input audio format is > 5.1.
5 Maintenance, Care, Storage and Transport
The products are maintenance-free.
Material damage
•
Clean only with a dry, soft cloth.
•
Do not use cleaning agents and chemicals.
•
Store cool and dry.
•
Store the product out the reach of children and in a dry and
dust-protected ambience when not in use.
•
Keep and use the original packaging for transport.
6
Liability Notice
•
We reserve the right to printing errors and changes to product,
packaging or product documentation.
•
See our terms of warranty. These are available in their current
form under the given contact details.
7
Disposal Notes
7.1 Product
According to the European WEEE directive, electrical and electronic
equipment must not be disposed with consumers waste. Its
components must be recycled or disposed apart from each other.
Otherwise contaminative and hazardous substances can pollute our
environment.
As a consumer, you are committed by law to dispose electrical and
electronic devices to the producer, the dealer, or public collecting points
at the end of the devices lifetime for free. Particulars are regulated in
national right. The symbol on the product, in the user`s manual, or at
the packaging alludes to these terms. With this kind of waste
separation, application, and waste disposal of used devices you
achieve an important share to environmental protection.
WEEE No: 82898622
7.2 Packaging
Packaging can be disposed of free of charge at the suitable collection
points – paper belongs in paper bins, plastics belong in yellow sacks
and glass belongs in used glass bins.
DE4535302615620
8
EU Declaration of Conformity
With the CE sign Goobay
®
, a registered trademark of the Wentronic
GmbH ensures, that the product is conformed to the basic standards
and directives.
9
Symbols used
For indoor use only
IEC 60417- 5957
Alternating current
IEC 60417- 5032
Direct current
IEC 60417- 5031
Polarity of d.c. power connector
IEC 60417- 5926
Recycling
ISO 7001 - PI PF 066
Class II equipment
IEC 60417- 5172
