15
User manual
Installation place
If possible sunbathing or light-rich places or house sites
Solar panel
Voltage (V)
5
Type
Poly-Crystalline Silicone
Mono-Crystalline Silicone
Work (Wp)
0.7
1.0
2.3
4.4
Tab. 2:
Specifications
3 Intended Use
Any use other than those described in the chapter „Description and Function“
and „Safety Instructions“ is not permitted.
IP65
This product is dust-proof against touch and protected against water
jets.
4 Preparation
•
Compare the specifications of all used devices to ensure compatibility.
•
Check the scope of delivery for completeness and integrity.
5 Installation
Risk of electric shock / Risk of falling
• Place and use tools safely.
•
Pay attention to current-carrying or other
lines, lying behind plaster and do not
damage them!
The surface must be stable. The supplied mounting material is only for
concrete and stone walls. For mounting on other surfaces, other dowels must
be used.
Plants, street lighting, reflecting surfaces and arbitrarily moving objects may
not be located in the detection area.
Recommended mounting location: as sunny as possible, 2-4 m mounting
height.
1. Use the included template and, if necessary, a water scale for mar-
king mounting holes.
2. Drill the necessary number of mounting holes with a Ø 6 mm drill.
3. Insert the necessary number of dowels and mounting screws into
the
holes.
Leave the mounting screws approximately 4 mm standing out of the wall.
4. Hang the product from the top onto the mounting screws.
5. Gently tighten the mounting screws.