公信会议系统用户手册
User Manual for Conference Systems
Page 28
软件应用环境
Software application environment
Windows
操作系统：
Windows 98/2000/XP/Me/NT/Vista®
盘空间：
10M
以
上其它：光驱、
RS232
通讯口
Windows OS: Windows 98/2000/XP/Me/NT/Vista®; memory: larger than 10 MB; others: driver and RS232
interface
软件的安装
Software installation
将矩阵控制软件光盘放入光驱内，运行光盘中的
Setup.exe
程序，启
动安装程序，根据安装向导的提示完
成软件的安装。
Put the disk containing the matrix test software onto a CD-ROM or DVD-ROM drive, run the Setup.exe program
in the disk to start the setup program, and follow the setup wizard to complete software installation.
软件的启动
Software startup
用随机附件
RS232
连接线将矩阵的
RS232
通讯口与控制电脑的
RS232
通讯口相连接。接通电源后即可在
控制电脑上启动控制软件。
Use the RS232 cable delivered with the matrix to connect the matrix device and a PC over the RS232 interface.
After the matrix is powered on, the test software can be enabled on the PC.
软件使用说明
Guide to software use
①字符化控制
Character-based page
该控制页面是专门针对矩阵而设计的，它所控制的矩阵规模原则
上不受限制。采用模拟键盘输入方式，
完成对矩阵的控制。
This page is specifically designed for matrixes. Theoretically, the number of matrixes that can be controlled is not
limited. Use the virtual keyboard to control matrixes.
1\
串口设置区：
Serial port setting area:
主要对与矩阵切换器相连接的电脑
COM
口的控制，在软件运
行开始时，本软件会自动査询该电脑可被使
用的
COM
口，并
自动加入
“
串口选择
”
栏内，单击
[
打开串口
]
按钮即完成串口
的打开，同时在状态提醒栏
显示
“
串口
COM3
已经打开！
”
等信息。你也可以在
“
串口选择
”
栏内的下拉项中选择其他可用
的串口。
This area is used to realize control over the COM ports of the PC connected to the matrix switcher. At the
beginning of software running, the software will automatically query available COM ports of the PC and list them
into the “Serial port selection” column. Click [Open serial port], and information such as “COM3 serial port is
opened” will be shown in the “Status prompt” column. You can select another available serial port from the
dropdown menu in the “Serial port selection” column.
2\
系统检测区
System query area
主要完成对矩阵的型号和设备号的读取，对设备号的修改等操作。
This area is used to query model and device ID of matrixes and modify device ID.
►
单击
[
设备检测
]
按钮，状态栏显示
“
检测机器型号和设备号完成
”
，系统自动获取矩阵参数，并将各参数
写入机
器型号和设备编号栏内。
►Click [Device query]. If “Completing querying machine model and device ID” is shown in the status bar, the
system automatically obtains matrix parameters and shows the parameters in the “Machine model and device ID”
column.
Summary of Contents for GX-DVI0808
Page 1: ...1 35...
