公信会议系统用户手册
User Manual for Conference Systems
Page 15
[Call]
为调用功能键，在调用操作时，其操作方法如下：
“Call” + “X”+ “Take”(X
的值为
1--4)
。
It is a calling key. To perform a calling operation, press the following keys: [Call] + [X]+ [Take] (value range
of “X” is 1~4).
如：如果要调用刚存入的
“F1: 01010801”
状态时，则需按下
[Call]
按键改变为
“Call”
等待输入状态值
1
，
然后按
Take
键结束操作，该状态就被调用。
Example: To call the saved status “F1: 01010801”, press the [Call] key to change to “Call”. Enter “1” and
then press the [Take] key. The status is successfully called.
6.2
遥控器操作
Operation by the Remote Controller
遥控操作与面板操作方法相同，具体操作方法请参考面板按键操作。
注：功能键
[↑↓] [CALL]
、
[SAVE]
为
2U
以上（包括
2U)
机器特有。
The method of operating the camera through the remote controller is similar to
that through the panel. Refer to section 6.1 for specific operation procedure.
Note: The keys [↑], [↓], [CALL], and [SAVE] are available on 2U and above cameras.
Summary of Contents for GX-DVI0808
Page 1: ...1 35...
