Gonnheimer Elektronic F870S, User Manual

Page: 3 / 47

F870S Inhalt Page 3
Gönnheimer Elektronic GmbH Tel.: +49 (6321) 49919-0 Fax: +49 (6321) 49919-41
5.4 Dimensions .................................................................................................................................. 27
5.5 Mounting examples ...................................................................................................................... 29
5.6 Flow diagram ................................................................................................................................ 29
5.7 Block diagram .............................................................................................................................. 30
5.8 Transport, Storing, Disposal and Repairs .................................................................................... 31
5.9 Sequence of operation diagram ................................................................................................... 32
5.10 List of Parameters .................................................................................................................... 33
The symbols WARNING, CAUTION, NOTE
This symbol warns of a serious hazard. Failure to observe this warning may
result in death or the destruction of property.
This symbol warns of a possible failure. Failure to observe this caution may
result in the total failure of the device or the system or plant to which it is
connected.
This symbol highlights important information.
Safety Measures: to read and to comply
Warning! Extreme
caution
is advised when handling this device. High
electrical discharge is possible and can be fatal.
Work on electrical installations and apparatus in operation is generally forbidden in
hazardous locations, with the exception of intrinsically safe circuits. In special cases
work can be done on non-intrinsically safe circuits, on the condition that during the
duration of such work no explosive atmosphere exists.
Only explosion protected certified measuring instruments may be used to ensure
that the apparatus is voltage-free. Grounding and short-circuiting may only be car-
ried out, if there is no explosion hazard at the grounding or short circuit connection.
Danger of static charge!
Clean only with humid cloth!
Do not open when an explosive dust atmosphere is present!