background image

 

-

17-

 

7.

 

Lock/unlock function 

To lock                or unlock              front panel & software 

 

8.

 

IP Configure 

User  also  can  use  the  WEB  to  control  the  device.  Firstly,  user  should  click  on  the         

  button

               

to setup network set. Next, users can setup the Ethernet for the unit as below example shows. After 
the step of IP configuration, please click the                      button. 

The default IP: 

192.168.1.46 

 

 

9.

 

Info 

Read the Software and firmware version. 

 

*Software/firmware information subject to change without notification. 

 

10.

 

Refresh 

This function can get all information of the device and update this software state. 

 

 

 

 

-

18-

 

WARRANTY 

The  SELLER  warrants  the 

VP-5004MZ2-R  4x2  4K  Multi-View  Seamless  Presentation  Matrix 

Switcher with Recorder

 free from defects in the material and workmanship for 1 year from the date of 

purchase from the SELLER or an authorized dealer. Should this product fail to be in good working order 
within 1 year warranty period, The SELLER, at its option, repair or replace the unit, provided that the unit 
has not been subjected to accident, disaster, abuse or any unauthorized modifications including static 
discharge and power surge. This warranty is offered by the SELLER for its BUYER with direct transaction 
only. This warranty is void if the warranty seal on the metal housing is broken. 

Unit that fails under conditions other than those covered will be repaired at the current price of 

parts and labor in effect at the time of repair. Such repairs are warranted for 90 days from the day of 
reshipment to the BUYER. If the unit is delivered by mail, customers agree to insure the unit or assume 
the risk of loss or damage in transit. Under no circumstances will a unit be accepted without a return 
authorization number. 

The warranty is in lieu of all other warranties expressed or implied, including without limitations, 

any  other  implied  warranty  or  fitness  or  merchantability  for  any  particular  purpose,  all  of  which  are 
expressly disclaimed. 

Proof of sale may be required in order to claim warranty. Customers outside Taiwan are responsible 

for shipping charges to and from the SELLER. Cables and power adapters are limited to a 30 day warranty 
and must be free from any markings, scratches, and neatly coiled. 

The content of this manual has been carefully checked and is believed to be accurate. However, 

The SELLER assumes no responsibility for any inaccuracies that may be contained in this manual. The 
SELLER will NOT be liable for direct, indirect, incidental, special, or consequential damages resulting 
from any defect or omission in this manual, even if advised of the possibility of such damages. 

Also, the 

technical  information  contained  herein  regarding  the  VP-5004MZ2-R  features  and  specifications  is 
subject to change without further notice. 

 
 

Summary of Contents for VP-5004MZ2-R











Reviews: