3
PACKAGE CONTENTS
● 1x EX-57VAC-100E-A [TX & RX]
● 1x IR blaster
● 1x IR receiver
● 1x DC 24V 1A in-line with C7 power cord
● 1x User Manual
● 2x 3-pin Terminal Block Connector
CONNECTION DIAGRAM
4
PANEL DESCRIPTIONS
Transmitting unit
►
EX-57VAC-100E-A-TX
Front/Rear Panel
1.
Dip Switch:
for F/W update
2.
LED:
Power LED, Link LED, Signal LED
(1) Power LED: Power indicator LED
(2) Signal LED: When transmitting unit receive the HDMI signal, the LED light will shine
(3) Link LED: Link indicator LED
3.
RCA connector:
remote ARC output
4.
Latch-locking power jack:
Connect to 24V DC power supply
5.
RJ45:
Plug in a Cat-5/5e/6 cable that needs to be linked to the receiving unit EX-57VAC-100E-A-RX
6.
IR Receiver:
Infrared 3.5mm socket for plugging in the extension cable of IR receiver
7.
IR Blaster:
Infrared 3.5mm socket for plugging in the extension cable of IR blaster
8.
RS-232(terminal block format):
The order of RS-232 pin are TX, RX, GND (from the left side to the
right)
9.
HDMI IN:
Connects to a HDMI source with HDMI male-male cable
10.
Ethernet port for LAN:
Connect to network device
DIP Switch Position
Description
PIN#1
OFF [
]
Reserved
ON [
]
Reserved
PIN#2
PIN#3
OFF [
]
OFF [
]
RS-232 normal use
OFF [
]
ON [
]
Reserved
ON [
]
OFF [
]
For system firmware update
ON [
]
ON [
]
For HDBaseT firmware update
