4
PANEL DESCRIPTIONS
Transmitting unit
►
CV-57KH-TX
Front Panel
Rear Panel
1. EDID MODE:
0 = [Video]
–2D / Full-HD
24bit
1080p@60
[Audio]
– up to
7.1ch
surround sound
1 = [Video]
–2D / Full-HD
24bit
1080p@60
[Audio]
– up to
2.0ch
surround sound
2 = [Video]
–2D / Full-HD
36bit
1080p@60
[Audio]
– up to
7.1ch
surround sound
3 = [Video]
–2D / Full-HD
36bit
1080p@60
[Audio]
– up to
2.0ch
surround sound
4 = [Video]
–2D / HD
24bit
(
1080p@30)(1080i@60)(720p@60)
[Audio]
–up to
7.1ch
surround sound
5 = [Video]
–2D / HD
24bit
(
1080p@30)(1080i@60)(720p@60)
[Audio]
–up to
2.0ch
surround sound
6 = [Video]
–
3D
/ Full-HD
36bit
(
1080p@60)
[Audio]
– up to
2.0ch
surround sound
7 = [EDID Learning Mode]
– learns EDID from the display
2. HDMI IN:
Connect to a HDMI source with a HDMI male-male cable
3. +5V DC:
Connect to a 5V DC power supply unit
4. HDMI
Signal
OUT:
Plug in a Cat.5/5e/6 cable that needs to be linked to the receiving unit CV-57KH-RX
Receiving unit ► CV-57KH-RX
5. HDMI output:
Connect to a HDMI display with a
HDMI male-male cable here
6. HDMI Signal IN:
Plug in a Cat-5/5e/6 cable that
needs to be linked to the receiving unit
CV-57KH-RX.
5
CONNECTION DIAGRAM
1. Connect your HDMI/DVI source (such as a Blu-ray Disc player) to the transmitting unit CV-57KH-TX.
2. Plug-in the receiving unit CV-57KH-RX to your HDMI display (such as a HDTV or a projector).
3. Connect your CAT-5/5e/6 LAN cable between the transmitting and receiving units.
4. Make sure your CAT-5/5e/6 LAN cable is tightly connected and not loose.
5. Plug in 5V DC power cord to the power jack of the transmitting unit CV-57KH-TX.
EDID Learning
1. Turn on CV-57KH-TX.
2. Turn the Mode of CV-57KH-TX counterclockwise from 0 (for surround sound) or 1 (for stereo) to 7.
3. Use a HDMI cable to connect CV-57KH-TX & the display (better not connect to video source). The
LED on the RJ-45 of CV-57KH-TX will dim and light again, which indicates the EDID learning process
is finished.
4. Turn the Mode of CV-57KH-TX clockwise from 7 to 0 (for surround sound) or 1 (for stereo). The most
important thing is don’t let the rotary arrow pass through 6 which will erase the EDID just learned and
restore to default EDID.
5. Connect CV-57KH-TX and the video source through a HDMI cable and enjoy the experience.
