6
DOOR PANEL INSTALLATION
Codes assigned to the call buttons of the sound module:
1 2 3 4 5 6
ON
NA2
+
AP-
C1 NA1
AP+
C2 AP+ AP- P1 P2 BUSBUS
Relé 2
Relé 1
_
12Vdc
1
2
EL632/GB2
C
16 31
odes
-
C
0 15
odes
-
P1
P2
P2
The sound module's P1 and P2 push buttons are assigned with factory codes.
-
Apartment 1, push button “P1”:
Assigned with codes 0-15.
Monitors in this apartment must be set with codes in order of allocation of 0-15.
When push button
“
P1
”
on the door panel is pressed, all of the monitors in apartment 1 will receive the call and
only the monitor assigned with code 0 will show the door panel image. If the call is answered from any other
monitor in the apartment, the image on the monitor assigned with code 0 will disappear and audio and video
communication will be established with the door panel.
-
Apartment 2, push button “P2”:
Assigned with codes 16-31 (
.
only kits with 2 push buttons)
Monitors in this apartment must be set with codes in order of allocation of 16-31.
When push button
“
P2
”
on the door panel is pressed, all of the monitors in apartment 2 will receive the call and
only the monitor assigned with code 16 will show the door panel image. If the call is answered from any other
monitor in the apartment, the image on the monitor assigned with code 0 will disappear and audio and video
communication will be established with the door panel.
C
s 16 31
ode
-
Description of the configuration dip switch of the sound module:
1 2 3 4 5 6
ON
+
C1
_
1
The configuration dip switch is located on the left side of the rear part of the
module.
1 2
3 4 5 6
ON
Door Panel Address:
Dip switches: 1 and 2 OFF (address 1), 1 ON and 2 OFF (address 2), 1 OFF and
2 ON (address 3), 1 and 2 ON (address 4).
1 2
4 5 6
3
ON
Leave OFF.
1 2 3
5 6
4
ON
Set to OFF for use with door panels in
and set to ON for use in apartment
villas
buildings.
1 2 3 4
6
5
ON
Set to ON to con
#
gure the door release time to 5 seconds. Set to OFF to
con
#
gure the door release time to 1 second.
1 2 3 4 5
6
ON
Set to ON to con
#
gure: (see page 8-9)
The vocal synthesis language (using the sound module's P1 push button).
Relay 1 and Relay 2 of the lock release will be NO or NC (using the sound
module's P2 push button). Set to OFF when con
#
guring is complete.
*
( )
*
( )
Factory default setting.
*
( )
*
( )
*
( )
*
( )
*
( )
STAINLESS STEEL NEXA MODULAR GB2 VIDEO SYSTEM KIT – VILLAS
