DESCRIPTION OF THE MODULE
2
Description of the CD-NEXA/BT module
AUDIO AND VIDEO DOOR ENTRY SYSTEM - WIRELESS MODULE
SW1 DIP switch
.
CN1 connector (reserved for internal use).
Red LED indicating data communication.
Green LED indicating connection status.
Nexa bus connector.
Description of the SW1 DIP switch:
For the CD-NEXA/BT module to operate properly, keep DIP switches 1 and 2 in the OFF position.
1
2
Description of the Nexa Bus link connector
:
The Nexa Bus link connector is located at the bottom of the CD-NEXA/BT module
.
Connect the cable supplied with the module to connect with other modules by means of the Nexa
bus, thereby providing the system with a wireless configuration interface.
The following modules allow a wireless configuration:
ð
N3403/AL:
Display module.
ð
N3301/AL:
.
Access control module and coded panel
Description of the status LEDs:
Blinking
Fixed
Blinking
Off
Green LED
Red LED
In standby
.
Waiting for connection to be established.
Data transmission.
Connection established.
Off
Off
Fixed
Off
Status
INSTALLATION OF THE MODULE
Positioning the CD-NEXA/BT module:
Position the CD-NEXA/BT module at the back of the embedding box, connect the link hose to the
Nexa bus as shown in the drawing, then connect the other end of the hose to any of the free
connectors of the bus of the N3403/AL, N3301/AL or EL3002 modules (if any).
Important:
.
For proper operation, avoid placing the module on a metal base
