Impact Screen NEW Version
Top / Upper Side:
Use the Hammerscrews approx 25mm Long, and and 8 mm NUT, for the Fixed mount of the Im
-
pact Screen on the Top Bar. Hammerscrew through the Eyelet and mounting with the Nut.
The Postion of the Screen is direclty inside of the Box, as you see in the Picture Below.
Stretch then the screen and screw it on the Top Bar, so it is on Top as Flat as Possible.
The use a Fast Fix on the Left and Right Bottom to stretch the Impact Screen out - this already
would be enough of tension, to have a flat screen.
Left / Right Sides:
Then position the attached rolls always in the middle of the eylets (eyes) as shown in sketch, on
the Left and Right post.
Now use the bungee cord and start as in the Sketch shown to stretch out the Impact screen with
the bungee, and fasten it with the Black Fast Fix.
It should be strechted but should be still exible and soft, this should take no real force to have
this done.
Side Latches:
Now velcro the Latches of the Screen to the Side walls, so the Sides are protected, and the Ball
can not exit the Cage.
