Golf Geum Technology EDM01, User Manual

Page: 8 / 17

PAIRING REMOTE CONTROL TO EDM01
14
If the pairing process was unsuccessful (red light is flashing instead of
green light), switch both units OFF, check the USB cable (or change it) and
repeat the above process again.
USB cable and switch the EDM and the remote control OFF.
Once the EDM and remote control are switched back on, the trolley is ready to
use.
If green light comes on, the pairing process was successful. Disconnect
Once green or red light is flashing, release both buttons.
On remote control, press and hold both ON/OFF and STOP buttons until
green or red light comes on.
Switch remote control ON.
Switch electric drive ON.
Connect remote control into the EDM using USB cable.
In the event of loss of communication between remote control and EDM01, or
use of a new remote control with your EDM it may be necessary to “re-pair” the
connection.