1. DEVICE OVERVIEW & CHARGING
I.
I.
II.
III.
Using your GolfBuddy LD2 GPS Golf Watch
Press any button to
Power ON
.
Your GolfBuddy LD2 will power on to the Home (time) screen.
From the time screen (image
A.
) you can:
I.
Activate the backlight for 10 seconds with the upper button.
II.
View the main menu options with the middle button.
III.
Toggle between the date display & battery indicator with the
lower button.
Charging your Device
Squeeze the back of the USB charging
clip to open. Carefully align the Guide
Pins on the USB clip with the guide
holes on the back of the watch. This
will properly align the charging pins
on the clip with the charging ports on
the watch. Plug the USB clip into a
standard USB port. This USB clip is
compatible with USB ports found on
computers, laptops, in automobiles,
or standard 5V AC USB chargers
(image
B.
).
The screen shown in the image to the left (image
C.
) will display when the device is connected to the
USB charging clip. This screen indicates USB data
connection as well as battery charging.
After 15 minutes, the USB data connection will enter
sleep mode, depicted in the image to the right;
however, the battery will continue to charge until
full. Full battery is indicated by a solid battery icon
and "100%" text below the battery icon (image
D.
).
Note:
To re-establish USB data connection at any
time (in order to sync with the GB Manager and
update your device), press the upper button (
I.
).
Note:
If your LD2 battery stops scrolling when
connected and shows a low-battery icon (image
C.
), it indicates that a full charge has not been
achieved. Check your connection to make sure
the pins are properly aligned with the contacts,
then allow the LD2 to charge until the battery
shows 100%.
3
Align the Guide Pins on the
USB clip with the Guide Holes
on the back of the watch.
Note:
It is recommended
that you charge your LD2
prior to each round of Golf
A.
B.
C.
D.
