The unique Dual Shot Distance Measurement feature (image
L.
)
allows you to track 2 shots separately (i.e. drive, approach) or 2
shots simultaneously (i.e. your drive and your partner's drive). To
track the distance of any shot, cycle to the Shot Distance screen
with the center button (
II.
). When standing at the location where
the shot is taken, activate one or both of the Shot Distance fields by
pressing the corresponding upper button (
I.
) or lower button (
III.
).
Doing so will set the shot location (point A) to zero, and the device
will begin measuring distance as you move toward your ball. Once
you have made it to your ball (point B), the number displayed is the
distance between point A and point B in a straight line (image
M.
).
You may pause an active shot distance field by pressing the
corresponding button while measuring. Pressing the center button
(
II.
) when on the Shot Distance screen will return to the FCB screen.
Active shot measurements will continue in the background (unless
paused), and can be viewed by cycling back to the Shot Distance
screen.
Note:
Shot data will reset when a hole advancement occurs
(automatic hole advance or manual hole advance).
The Information screen (image
K.
) shows the current time, remaining
battery life, current hole number, and current green selection (when
applicable). The user may
EXIT
the round by pressing the upper
button (
I.
) and see Confirm Exit Round, page 11 to Exit.
When two greens are present, (L) or (R) will be listed next to the hole
number, depicting the green that is currently selected. Press the
lower button (
III.
) to change the green selection accordingly.
Note:
The FCB screen will also show (L) or (R) when 2 greens are
present. If the wrong green is selected, cycle to this screen to change
it.
Press the (
II.
) button to advance to the Dual Shot Distance
Measurement screen.
Dual Shot Distance Measurement:
Information Screen / Exit Game:
5. GOLF MODE (continued)
10
II.
II.
II.
III.
III.
III.
I.
I.
I.
K.
L.
M.
