Golf Buddy BB5, User Manual

Page: 10 / 42

18 19
User M
anual
■
Mark Shot Function
While in GOLF mode, you can measure your shot distance by marking your
position with the BB5 Mark function. Press and hold the button to “Mark”
your current position (Fig. I). The screen will show that the distance counter
is re-set to zero (Fig. J). When you arrive at the position you want to measure,
press the button to display your shot distance (Fig. K).
■
End GOLF mode
To exit GOLF mode after play, press the button twice in quick succession.
The screen will display “END” and you can then choose between YES or NO by
pressing the buttons and press button to confirm the selection.
* If you exit the golf course, your BB5 will exit GOLF mode
automatically to conserve battery.
■
Selecting Meter / Yard
To change measurements from meters to yards, press and hold the
button while in GOLF mode. The screen will display the Distance mode
screen shown below. Use the buttons to select between meters (M) or
Yards (Y) then press the button to confirm.
■
Change to previous Hole
(Note: This function will not operate in “Demo” mode)
To change back to previously displayed hole, press and hold both
buttons. The following will display on the screen indicating the change being
made.
(Fig. I) (Fig. J) (Fig. K)