6. Fill your fuel tank making sure your vent line is not plugged or capped. With the canopy off, this is a good
time to check for any fuel leaks.
7. Check all control surfaces for secure hinges by performed a slight tug on the control surfaces and observing
if there is any give in the hinges. Check all control rods, ball links, servo screws, etc. for correct operation and
installation.
8. Check your batteries and perform a range check once again with the engine off and running. Be sure all
surfaces are moving in the correct direction and the correct amount for your flying setup.
9. You are now ready for your maiden flight! Good luck and enjoy your new aircraft! If you have any
comments or questions about this manual or the aircraft please email
.
Recommend Accessories
（
Not included
）：
*KUZA 2.3X15mm Socket Head Self Tapping Servo Screws
No. KAG002622
