2. Fit the Cowl and measure the distance from the engine bulkhead to the front of the cowl, add approx 2-
3mm for the back plate and this is the length that your engine should be set. Using the correct length stand
offs, mount your engine securely using bolts, washers, and locknuts. The use of thread-lock is also highly
essential for the engine bolts.
3. Mount the ignition module according to the manufacturer’s instructions. The best place to mount it is on
the side of the engine box. Secure the pickup lead and ignition wires with zip ties so that they do not vibrate
or touch any hot part of the engine or exhaust.
4.
The following pictures show how to install a canister.
