10. Check the operation of the rudder using your radio and make sure there is no binding and the cables are
adjusted properly. You may have to tighten the cables after a few flights as they may stretch slightly from the
initial installation.
11
．
We recommend using KUZA 3.25” aluminium CNC servo arm (sold separately) for rudder control.
LANDING GEAR ASSEMBLY
NOTE: There are pictures of different planes in this manual, however, this plane’s landing gear is assembled
the same way.
1. Locate the supplied main and tail wheel landing gear parts and sort them out on your workbench.
2.
Bolt the main gear to the bottom of the fuselage using the supplied screws and stainless steel Self-locking
nuts. Place the bolts in through the can tunnel opening with appropriate size spanner. Remember the
gear will rake forward.
