Goldwing RC 91in EXTRA300LP50-60CC, Instruction Manual

Page: 44 / 49

6. Fill your fuel tank making sure your vent line is not plugged or capped. With the canopy off, this is a
good time to check for any fuel leaks.
7.
Position the canopy in place and tighten ALU Canopy Bolts. Be sure to use the supplied PTFE
washers under the screw heads.
8. If you have removed your horizontal stabilizers, install them once again and check all bolts and
connections.
9.
Check all control surfaces for secure hinges by performed a slight tug on the control surfaces and
observing if there is any give in the hinges. Check all control rods, ball links, servo screws, etc. for proper
operation and installation.
10.
Check your batteries and perform a proper range check once again with the engine off and running.
Be sure all surfaces are moving in the correct direction and the proper amount for your flying setup.