Goldwing RC 91in EXTRA300LP50-60CC, Instruction Manual

Page: 30 / 49

2. Bolt the main gear to the bottom of the fuselage using the supplied bolts. Place the nuts in through the
can tunnel opening with appropriate size spanner. Remember the gear will rake forward.
3. Loosen out the second nut, then apply 30 minute epoxy glue on the axle. Tighten the nut back in place,
allow at least 1 hours for threadlocker to dry.
4. Install the main wheel axles to the composite landing gear and tighten the nylon-insert lock nut. Install
one wheel collar onto the axle.
Use a second wheel collar as a guide to leave a gap on the inboard of the
axle. Use a small drop of thread-lock and tighten in place. Slide the wheel onto the axle and install a
second wheel collar also using thread-lock on the set screw.