Installation
9
5.
Installation
Goldstein 800 Series V Fryers are designed to give long and satisfactory service and incorporate the
best possible materials and workmanship. Proper installation and preventative maintenance are vital
for optimum performance and efficiency.
5.1 Receiving Inspection & Unpacking
▪
Remove carton, packaging and all plastic protective material from the appliance.
▪
Check for damages to the appliance and report any damage to the transport company and
dealer.
▪
Ensure all loose packaged items i.e. legs, baskets, basket holder, trays and warranty cards
are provided with the unit and report any missing items to the dealer.
▪
Check that the rating plate- located on the back of the door- corresponds with the available
gas supply.
5.2 Installing into Location
▪
This appliance must be installed under an exhaust hood with adequate means of ventilation.
Do not block, obstruct or connect a ventilation system directly to the appliance flue.
▪
Lift off the base and screw in the adjustable legs provided with the appliance. Do not install
the appliance without the legs or place any obstructions in and around the base. Primary air
for burner combustion is supplied through the base of the appliance and must be kept clear
of obstructions.
▪
Position the appliance into the correct position.
▪
Level off the unit from left to right with a spirit level by rotating the feet. Also, level front to
back with a fall of 2-3mm to the front to improve appliance ventilation & flue efficiency.
5.3 Installation Clearances
The following table shows the required clearances around this appliance to ensure correct and safe
operation to the user, the appliance and its surroundings. Please refer to AS5601 or AS/NZS5601 for
detailed gas installation requirements.
Combustible material
Non-combustible material
Back
150mm
0mm
Sides
100mm
0mm
WARNING
This appliance must be installed by authorized personnel and in accordance with AS5601 &
AS/NZS5601
–
Gas Installations and manufacturer’s specifications outlined in this manual.
Installation, maintenance or repairs by unauthorized and unqualified personnel will void the
warranty.
