2.3.6 ROTARY SWITCH
1. Remove the control box. (Refer to section 2.1.3)
2. Unfold the control box. (Refer to section 2.3.3)
3. Remove 2 screws which fasten the rotary switch.
4. Disconnect all the leads of the rotary switch
terminals.
5. Remove the rotary switch. (See Fig. 15)
6. Re-install the components by referring to the
above removal procedure, above.
2.3.7 SYNCHRONOUS MOTOR
1. Remove the control box. (Refer to section 2.1.3)
2. Unfold the control box. (Refer to section 2.3.3)
3. Remove the crankshaft.
4. Disconnect all the leads of the synchronous
motor.
5. Remove the 2 screws which fasten the
synchronous motor. (See Fig. 16)
6. Re-install the components by referring to the
removal procedure, above.
—14—
Figure 16
Figure 15
Summary of Contents for LWC243NSAB0 Y5USC18-6A
Page 34: ... 34 5 2 ELECTOINC CONTROL DEVICE MODEL M1802 ...
Page 45: ...MEMO 45 ...
Page 46: ... 46 MEMO ...
Page 47: ...P No 3828A20140A January 2005 Printed in Korea ...
