- 9 -
3. Loosely assemble the sill support using the
parts in Fig. 3.
4. Select the position that will place the sill
support near the outer most point on sill
(See Fig. 4)
NOTE: Be careful when you install the cabinet
(frame guides
¤
are broken easily).
5. Attach the sill support to the cabinet track hole
in relation to the selected position using
2 Type A screws in each support(See Fig. 4).
6. The cabinet should be installed with a very
slight tilt(about
1
/
2
") downward toward the
outside (See Fig. 5).
Adjust the bolt and the nut of sill support for
balancing the cabinet.
7. Attach the cabinet to the window stool by
driving the screws
¤
(Type B: Length
5
/
8"
and
below) through the front angle into window
stool.
8. Pull each Frame curtain fully to each window
sash track, and repeat step 2.
9. Attach each Frame curtain the window sash
by using screws
¤
(Type C).
(See Fig. 6)
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Sill Support
¤Ł
Nut
¤Œ
Screw(Type A)
¤º
Screw(Type B)
¤
Screw(Type A)
Screw(Type B)
¤
Sash track
Front Angle
Type C
¤
Sill support
¤Ł
Sill support
¤Ł
¤
Frame Guide
Cabinet
About
1
/
2
"
About
1
/
2
"
Bolt
¤Ø
OUTDOOR
OUTDOOR
INDOOR
INDOOR
