- 5 -
HOW TO SECURE THE DRAIN PIPE
AIR FILTER CLEANING
In humid weather, excess water may cause the
BASE PAN to overflow. To drain the water, remove
the DRAIN CAP and secure the DRAIN PIPE to the
rear hole of the BASE PAN.
The air filter should be checked at least twice a month to see if cleaning is necessary. Trapped particles in
the filter will build up and block the airflow. This reduces the cooling capacity and also causes an
accumulation of frost on the cooling coils.
1. Open the inlet grille upward by pulling out the bottom of the inlet grille.
2. Remove the air filter from the front grille assembly by pulling the air filter up slightly.
3. Wash the filter using lukewarm water below 40°C (104°F).
4. Gently shake the excess water from the filter completely. Replace the filter.
Drain pipe
Drain cap
