3
ASSEMBLY/ADJUSTMENT
1. Orient the Curl Pad (1) and the Curl Post (2) as
shown.
Attach the Curl Pad (1) to the Curl Post (2) with
two M6 x 16mm Screws (3).
Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until
assembly is completed.
Assembly requires the included tool(s). Note: If a part is not in the hardware kit,
check to see if it has been preassembled. To avoid damaging parts, do not use power tools for assembly.
1
1
2
3
2. Remove the indicated Cap (A) from the Front
Leg (B).
Next, insert the Curl Post (2) into the Front Leg
(B) and align one of the holes in the Curl Post
with the hole in the Front Leg. Then, fully tighten
the Curl Knob (4) into the Curl Post.
When you are not using the Curl Pad (1),
remove the Curl Post (2) from the Front Leg (B).
Then, press the Cap (A) into the Front Leg.
3.
Make sure that all parts are properly tight-
ened before you use this product.
To order replacement parts, please see the
front cover of this manual.
To help us assist
you, provide the model number, serial number,
and name of the product. Also note the key num-
ber and description of each part.
1
2
A
4
B
Thank you for selecting the revolutionary GOLD’S
GYM
®
XR 6.1 CURL PAD. The XR 6.1 CURL PAD
enables you to perform additional exercises with your
weight bench.
For your benefit, read this manual carefully before
you use this product.
If you have questions after
reading this manual, please see the front cover of this
manual. To help us assist you, note the product model
number and serial number before contacting us. The
model number and the location of the serial number
decal are shown on the front cover of this manual.
BEFORE YOU BEGIN
2
