ASSEMBLY
Assembly requires two persons.
Place the treadmill in a cleared area and remove all packing materials. Do not
dispose of the packing materials until the treadmill is assembled.
Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a
small amount of lubricant may be transferred to the top of the walking belt, the sides of the walking platform, or
the shipping carton. This does not affect treadmill performance. If there is lubricant on top of the walking belt or
on the sides of the walking platform, wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.
Assembly requires included allen wrench , your own phillips screwdriver , rubber
mallet , wire cutters , and adjustable wrench .
For help identifying the assembly hardware, see the drawings below.
If a part is not in the parts bag, first
check to see if it has been preassembled.
6
1.
With the help of a second person,
carefully raise the
Uprights (65) until the Wheels (not shown) are resting on
the floor.
Hold the Book Holder (114) against the back of the
Console Base (117) and the Uprights (65) as shown.
Attach the Book Holder with four 3/4” Tek Screws (101).
114
101
65
65
117
101
1
3/4” Screw (43)–2
3/4” Tek Screw (101)–4
2 1/4” Bolt (10)–2
Nut (13)–2
Base Washer (94)–4
2” Bolt (26)–2
3” Bolt (23)–2
8” Bolt (71)–4