![background image](http://html1.mh-extra.com/html/golds-gym/ggel63908-0/ggel63908-0_user-manual_2239670005.webp)
5
ASSEMBLY
To hire an authorized service technician to assemble the elliptical exerciser, call 1-800-445-2480.
Assembly requires two persons.
Place all parts of the elliptical exerciser in a cleared area and remove the
packing materials. Do not dispose of the packing materials until assembly is completed.
In addition to the included tool(s), assembly requires a Phillips screwdriver
, an adjustable
wrench
, and a rubber mallet
.
As you assemble the elliptical exerciser, use the drawings below to identify small parts. The number in parenthe-
ses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The
number following the parentheses is the quantity needed for assembly.
Note: If a part is not in the hardware
kit, check to see if it has been preassembled.
M8 x 50mm Button
Screw (65)–2
M8 x 37mm Button
Screw (67)–4
M8 x 16mm Button
Screw (53)–5
M8 x 20mm Button
Screw (77)–4
M4 x 19mm
Screw (75)–7
M4 x 35mm
Screw (74)–1
M4 x 50mm
Screw (76)–4
M10 x 20mm Button
Screw (58)–4
M8 x 55mm Button
Bolt (85)–2
M10 x 25mm
Washer (52)–4
M8 Jam Nut
(68)–4
19mm Wave
Washer (71)–4
16mm Wave
Washer (66)–2
M8 x 25mm
Washer (54)–6
M8 Locknut
(70)–2