10
9. See the inset drawing. Attach the tether (A) on
the Locking Pin (21) to the bottom of the Frame
(1) with an M4 x 16mm Screw (28). Then, insert
the Locking Pin into the Frame and into an
adjustment hole in the Pivot Bracket (6).
Orient the Backrest (7) as shown. Attach the
Backrest to the Backrest Frame (5) with four
M6 x 16mm Screws (24); start all the Screws,
and then tighten them.
7
5
24
24
9
A
21
28
1
6
10. Attach the Seat (8) to the Frame (1) with
four M6 x 60mm Screws (17) and four M6
Washers (22); start all the Screws, and then
tighten them.
1
22
22
8
17
10
11. Make sure that all parts are properly tightened before you use the weight bench.
