6
ASSEMBLY
• To hire an authorized service technician to
assemble the weight rack, call 1-800-445-2480.
• Assembly requires two persons.
• Because of its weight and size, assemble the
weight rack in the location where it will be used.
Make sure that there is enough clearance to walk
around the weight rack.
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until assembly is fi nished.
• In addition to the included tool(s), assembly
requires the following tool(s):
two adjustable wrenches
one rubber mallet
one standard screwdriver
one Phillips screwdriver
Assembly may be easier if you have your own set
of wrenches. To avoid damaging parts, do not use
power tools.
1.
Go to www.workoutwarehouse.com/
registration on your computer and register
your product.
• activates your warranty
• saves you time if you ever need to contact
Customer Care
• allows us to notify you of upgrades and offers
Note: If you do not have Internet access, call
Customer Care (see the front cover of this
manual) and register your product.
1
2. Attach a Foot (13) to the Left Upright Base (2)
with an M5 x 19mm Screw (16). Next, insert an
M10 x 90mm Carriage Bolt (14) upward into the
Left Upright Base.
Attach the Left Upright Base (2) to the Base (1)
with two M10 x 90mm Carriage Bolts (14), an
M10 x 90mm Bolt (15), four M10 Washers (18),
and three M10 Locknuts (19) as shown;
do not
tighten the Locknuts yet.
Repeat this step for the Right Upright
Base (3).
2
2
3
15
14
13
16
14
18
18
19
19
1
Summary of Contents for GGBE20615.0
Page 4: ...4 STANDARD SERVICE PLANS ...