11
12. Slide the Left Cover (31) onto the left Saddle
Plate (18). Attach the Left Cover with a Small
Knob (42).
Attach the Right Cover (30) in the same
way.
13. Make sure that the Strap (28) is attached to
the hook on the bottom of the Backrest Frame
(6) with the Clip (27).
See the left inset drawing.
Hold the Buckle
(29), and route the end of the Strap (28)
through the upper slot in the Buckle
from the
side shown.
Next, route the Strap through the
lower slot in the Buckle. Then, route the Strap
upward through the hook on the bottom of the
Front Leg Frame (5).
See the right inset drawing.
Route the end
of the Strap (28) upward through the lower
slot in the Buckle (29). Then, route the Strap
through the upper slot in the Buckle.
Make
sure that the Strap is routed exactly as
shown in the inset drawings.
Make sure that all parts are properly tight-
ened before you use the inversion system.
12
30
31
18
42
13
27
28
6
28
29
5
28
29
62
5
7
64
54
WARNING:
HOW TO LOCK THE INVERSION SYSTEM
FOR STORE DISPLAY OR TO PREVENT
UNSUPERVISED USE
When the inversion system is displayed in
a store, or when it is not in use, it should
be locked to prevent unsupervised use.
Wrap the Lock Cable (62) around the Front
Leg Frame (5) and the Adjustment Frame
(7) as shown. Then, connect the ends of
the Lock Cable with an M8 x 20mm Button
Bolt (64) and an M8 Nylon Locknut (54).
Summary of Contents for GGBE0867.0
Page 17: ...17 NOTES ...
