Goldring 2000 Series, Instructions For Use Manual

Page: 2 / 24

English
INSTRUCTIONS FOR USE
1
Mounting. To protect the stylus from damage during mounting
do not remove the stylus guard until setting the stylus
pressure. Mounting is simpler if connecting leads are attached
before screwing cartridge into headshell.
This cartridge has standard 12.7mm fixing centres. Screws
are provided and these should be used to fasten the cartridge
rigidly to the headshell. Do not overtighten these screws.
Mount the cartridge so that when it is seen from the front and
the side its top surface is parallel to the record (see Fig. 1).
The use of a small mirror will help aligning the cartridge
correctly. Place the mirror on the turntable and rest the stylus
on it. Now make the necessary adjustments to the arm or
headshell to ensure that the cartridge is parallel with the
record surface and not tilted.
2 Connections. The contact pins are colour coded according
to the International Standard Colour Code. Connect the four
pickup leads to the corresponding pins on the cartridge (see
Fig. 2).
Warning.
Under no circumstances should the headshell leads
be soldered direct to the contact pins on the cartridge. Heat
applied to the contact pins will cause damage to the internal
connections.
2000 Series