GOLDMUND MIMESIS 27.5 - Analog Preamplifier - 6
1
SETTING UP THE MIMESIS 27.5 (Ctd.)
1.2
CHOICE OF THE PREAMPLIFIER LOCATION
The Goldmund Mimesis 27.5 preamplifier generates a significant amount of heat.
It is necessary to allow a proper cooling of the heat sinks. Avoid any location which is not
properly ventilated and avoid putting any equipment that is sensitive to temperature on top.
1.3 LINE VOLTAGE ADJUSTMENT
A voltage selector is provided on the back plate of the preamplifier. Adjust it with a
screwdriver if the line voltage provided is not appropriate.
ATTENTION: On the 220V position, the Goldmund Mimesis 27.5 preamplifier will function
properly for main line voltage in between 200V and 240V. On the 110V position, the main
line must deliver between 105 and 125V. If your main line is usually out of these tolerances,
please consult your Goldmund dealer.
Please check the value of the main line fuse. This fuse is located on the power cord
receptacle. The lid can be removed with a small screwdriver when the cord is removed.
Use a 500mA slow-blow fuse for 220V and 110V.
