C O N N E C T I N G T H E A M P L I F I E R
If you do not use a Goldmund Amplifier, select one stereo or two mono amplifiers with
sufficient speed and dynamic range to do justice to the qualities of the Logos1 HE. Slow
amplifiers will not have the capability to properly hold the ultra-fast crossover and drivers of
the Logos.
The cables coming from the Amplifiers may be connected to the 5 ways plug connectors on
the back panel, using highest quality banana plugs which can be tightened in position.
Try using Goldmund Speaker Cables or Goldmund SR Speaker Cables to allow the speed of
the amplifiers to properly control the drivers of the speaker. Cables of lower quality or speed
can ruin the sonic capabilities of the Goldmund Logos1 HE.
R U N N I N G - I N A N D M A I N T E N A N C E
The Goldmund Logos1 HE have been tested at the factory. However, as any high quality
speaker system, the Logos need many days playing music before providing the top sonic
quality they are built to provide.
The few first hours can be very frustrating for a demanding listener.
Do not hesitate to let them play quite loud some time before attempting any real system
tuning or position adjustment.
To clean the surface of the speaker, you may use a clean, soft, damp cloth. Dampen with
water or a mild detergent solution. Avoid abrasive or harsh cleansers (eg. products
containing sodium carbonate).
The identification plates are plated with precious metal. Simply clean them with a soft cloth,
without any chemical product.
4
5
User manual - GOLDMUND Logos1 HE Speaker System |
P 6
