background image

 

GOLDMUND LOGOS SUKHA Active Speaker - 5 

 

PRELIMINARIES 

 

 

The LOGOS SUKHA active speaker uses very innovative technologies to achieve a level of 
definition and neutrality never found before in a speaker system. 
Please  read  very  carefully  the  following  instructions.  These  high-precision  speakers  are 
extremely revealing and can provide the best sound only if they are used properly. 
For  exacting  technicians,  musicians,  and  all  those  who  demand  the  very  best  in  audio 
reproduction,  we  strongly  recommend  the  use  of  the  best  associated  components, 
especially electronics and cables. 

 

 UNPACKING 

 

 
The  LOGOS  SUKHA  active  speaker  requires  special  attention  during  unpacking,  we 
recommend  4  people  for  unpacking  and  installation  of  this  unit,  some  handling  steps 
necessitate a lot of care. 
 

ATTENTION 

 
If  you  need  to  return  the  speakers  to  the  factory  or  to  your  local  representative  for  a 
warranty  repair,  please  note  that  it  must  be  repacked  in  the  original  packing.  This 
packaging has been designed especially to protect the speaker in transit. Use of alternative 
packaging  will  almost  inevitably  result  in  damage,  which  cannot  be  covered  by  the 
warranty. 
 
 
 

Summary of Contents for LOGOS SUKHA













Reviews: