4
1. PRELIMINARIES
The Goldmund Epilogue 3/4 uses the same very innovative technology than the
Epilogue 2 to achieve a level of definition and neutrality never found before in a sub-
bass speaker system.
Please read very carefully the following instructions. This high-precision speaker is
extremely revealing and can provide the best sound only if it is used properly.
The Epilogue 3/4 is never used as a stand-alone speaker. Its most usual
configuration is associated to a pair of Epilogue 1 Satellite Speakers or by 2 units
included in a pair of Full Epilogue Speaker. See below the assembly instructions for
the Full Epilogue Speaker System.
2. UNPACKING THE EPILOGUE 3/4
ATTENTION :
Do not unpack the Epiframe cartons yet. The parts are much easier
to recognize by the indication we provide in the following instructions giving their
provenance from the Epiframe 1 or Epiframe 2 assemblies.
ATTENTION :
If you need to return the speaker to the factory or to your local
representative for a warranty repair, please note that it must be repacked in the
original packing. Otherwise new packing will be charged as well as the repair of
damages occurred due to poor packing conditions.
SPECIAL NOTICE :
The dealer who sold you the Epilogue also received a very
practical tool to install the Epilogue 3. Called the Epilogue "Helm", this rolling device
allows the Epilogue 3 to be rolled by a single person with perfect safety. The
Epilogue "Helm" may also be used for small moves when the full Epilogue has been
assembled if enough care is taken about vertical stability.
If you want to keep this accessory for yourself, it can also be purchased separately.
It is necessary to be
four
people to install the EPILOGUE 3/4, because the speaker
is extremely heavy and some handling steps necessitate a lot of care. Do not try to
do any assembly without the necessary help.
Cut the Epilogue 3/4 box attachments and remove the cover of the box.
Do not move the speaker now.
