background image

5  

 

 V 19-02 

 

 

 

INTRODUCTION 
 

 

 

 

 

 

 

 

 

 

 

 
Warning: 

1.

 

This appliance is not intended for use by persons (including Children) with 
reduce physical, sensory or mental capabilities or lack of experience and 
knowledge, unless they have been given supervision or instruction 
concerning use of the appliance by a person responsible for their safety. 
Children should be supervised to ensure that they do not play with 
appliance. 

2.

 

The appliance and its accessible parts become hot during use. 

3.

 

If surface is cracked, switch off the appliance to avoid the possibility of 
electric shock. 

4.

 

Care should be taken to avoid touching heating elements. 

5.

 

Warning: unattended cooking on appliance with fat or oil can be 
dangerous and may result in fire. NEVER try to extinguish a fire with water. 
But switch off the appliance and then cover flame e.g. with lid or a fire 
blanket.  

6.

 

Warning: Danger of fire do not store items on the cooking surfaces. 

7.

 

Means for disconnection must be incorporated in fixed wiring in 
accordance with wiring rules. 

 

 

 

 

 

 

 

 

 

 

 

Summary of Contents for RZ94T-1























Reviews: