GOLDENSEA UV UVP36, Quick Start Manual

Page: 8 / 16

www.goldenseauv.com
3
1. Manual Operation (control panel)
1) Close all the doors and windows.
2) Plug-in and power on, unlock the product by long pressing the Start touch key < > and
the Lock touch key < > on the device for 3 seconds until there is a beep.
3) Select time setting <15 mins>, <30 mins> or <60 mins> by the Time Setting touch key,
the touch key indicator light turns on.
4) Press the Start touch key, audible alarm starts beeping regularly for 30 seconds. The
UV lamp will turn on after the 30 seconds delay when disinfection time is set.
5) Once the disinfection process ends, the touch key indicator light turns off and an
audible alarm sounds. Open the doors and windows to ventilate the disinfected area.
Warning:
Don’t look at the disinfection light directly.
People, pets and plants should leave the
area when using the disinfection light.
Ventilate for 30-40 minutes after working.
2. Remote Control Operation
1) Close all the doors and windows.
2) Plug-in and power on, unlock the product by long pressing the Start button < > on the
remote control and the Lock touch key < > on the device for 3 seconds until there is a
beep.
3) Select time setting <15 mins>, <30 mins> or <60 mins> by the Time Setting button on
the remote control, the touch key indicator light on the device turns on.
4) Press the Start button, audible alarm starts beeping regularly for 2 minutes. The UV
lamp will turn on after the 2 minutes delay when disinfection time is set.
5) Once the disinfection process ends, the touch key indicator light on the device turns off
and an audible alarm sounds. Open the doors and windows to ventilate the disinfected
area.
Note: if the remote control loses pairing with the device, re-do the pairing by pressing the
Start button on the remote control and switch on (plug-in) the device for 5 seconds. One
remote control can be matched with multiple units of the same model.