Bellavista Signature
Italian Prestige Rigid Turntable
F.A.Q.
Adjustment
ACTION
DESCRIPTION
HOW TO ADJUST IT
DUST COVER FRICTION
ADJUSTMENT
•
The Dust Cover is hard or
slack during open/close adjustment
•
Adjust the single screw present on each
hinge till you reach your proper wanted friction
LEVELLING THE TURNTABLE
•
The Turntable is not
levelled
•
With a spirit level, only level the Turntable
Platter through its shelf layer eventually screwing
its feet just for very fine adjustment, take care of
levelling the platter on its vertical and horizontal
lines
•
The Turntable is not
levelled
•
Be sure that the turntable layer is enough
solid and rigid to support the weight of the
turntable easily
SPEED ADJUSTMENT ON THE
ADJUSTABLE ALUMINIUM PULLEY
•
The aluminium adjustable
pulley doesn’t spins at the right
speed
•
With the help of a “coin” screw clockwise
or anti-clockwise the pulley’s internal cone to
increase (clockwise) or decrease (anti-clockwise)
the speed.
Check the right speed with a proper stroboscope
VTA ADJUSTMENT
•
VTA tone arm is not
adjustable
•
The 3 arm board collar hex bolts are
screwed into the collar too much and do not let the
arm shaft gets in it; unscrew the hex bolts before
inserting the arm
•
VTA tone arm is not
adjustable
•
The tone arm shaft is too big to get into
the collar; ask your local dealer to have a custom
made collar may fit such arm
•
VTA tone arm is hard to
adjust
•
Once the proper height of the arm is been
approximately reached, fix the shaft with just a
hex bolt before screwing properly all the 3 hex
bolts of the collar; then once all the other
adjustment are properly set fix well, but not too
tighten all the 3 hex bolts
CLEANING THE TURNTABLE
•
The Turntable is dirty and
needs to be cleaned
•
With EXTREME care use ONLY pure alcohol
and a very soft 100% cotton cloth to sweep dust
and stains out.
Any acid or not extremely soft cloth will
irreversibly damage the turntable fine aesthetic.
Do not use any alcohol to clean the turntable
anodised label, pulley and motor spindle. Only dry
cloth is allowed
F.A.Q. & Adjustment
9
