8
8. Adjust the leg levelers on the bottom of the chair if necessary to level the chair.
Some high pile carpets can obstruct the footrest operation by rubbing against
it. Adjust the levelers to a height above the pile.
9. Slide the hand control from between the back and arm out toward the back of
the chair. Secure the cord into the quick release cable clamp located above the
magazine pocket on the arm of the chair.
W
all
Side
View
Corner
Top
View
21"
21"
21"
Distance Required From Wall
When Reclined
Model No.
Wall
Corner
PR445-MED
21 in.
21 in.
Power Lift Chair Operation
1. To recline your chair, press the down button (S2) and hold until you reach
your desired position. Then release the button.
2. To return to a seated position from recline, press the up button (S1) and
hold until the chair returns to a closed seated position. Then release the button.
3. To lift your chair, press the up button (S1) and hold until you reach your
desired height. Then release the button.
4. To return to a seated position from lift, press the down button (S2) and
hold until the chair returns to the floor seated position. Then release the button.
5. To lift your chair from a reclined position, press the up button (S1) and
hold. The chair will keep going past the seated position and start to lift. Release
the button when the chair reaches the desired height.
6. To recline your chair from the lift position, press the down button (S2)
and hold. The chair will keep going past the seated position and start to recline.
Release the button when the chair reaches the desired reclined position.
7. Getting into your lift chair. While standing next to your chair, press the
chair up button (S1) and raise the chair to a height you can sit against. This height
will vary from person to person depending on the individual’s needs. Raise the
chair high enough so you do not have to flop down into the chair. Flopping down
into the chair will damage it and could cause personal injury. Press the
chair down button (S2). As the chair continues downward, adjust yourself into a
position that is comfortable to you. Continue pressing the button until chair is in
the seated position (chair firmly on the floor), then release the button.
8. Getting out of your chair, press the chair up button (S1) and raise the chair
to a height that enables you to easily stand. Release the button. Return the chair
to the seated position (chair firmly on the floor) after getting out of the chair so
children, pets or obstructions do not get under the chair.
continued
continued from previous page
