Golden Technologies Cirrus PR-508 Owner'S Manual Download Page 3

Page: 3 / 24

Safety Guidelines

The symbols below are used in the owner’s manual and/or on the product

to identify warnings and notify you of important safety information. Make sure

you read and understand them completely.

WARNING! Indicate(s) a hazardous situation which, if not

avoided, could result in death or serious injury. This icon is

represented as a black symbol on a yellow triangle with a

black border.

MANDATORY! Failure to perform mandatory actions could

cause personal injury and/or equipment damage. This icon

is represented as a white symbol on a blue dot with a white

border.

PROHIBITED! Indicate(s) an action(s) that should not be

performed under any circumstance. Failure to adhere could

cause personal injury and/or equipment damage. This icon is

represented as a black symbol with a red circle and red slash.

Safety Symbols

The symbols below identify warnings, mandatory actions, and prohibited

actions. They can be found in the owner’s manual and/or on the product. Make

sure you understand all safety labels before operating the product.

Do not

remove

safety labels from your product.

Read and follow

owner’s manual!

Pinch/Crush Point

Hazard!

Transformer

Crush Hazard!

Child and/or Pet

Crush Hazard!

Fire Hazard!

continued on next page

Summary of Contents for Cirrus PR-508

























Search results

Summary of Contents for Cirrus PR-508

Reviews:

Related manuals for Cirrus PR-508

Brands by name

Popular brands

Golden Technologies Cirrus PR-508, Owner'S Manual

Search results

Summary of Contents for Cirrus PR-508

Reviews:

Related manuals for Cirrus PR-508

Brands by name

Popular brands