28
IX. TRANSPORTING YOUR Carry On
Figure 23. Carry On (Model GB120)
To Transport Your Carry On:
• Disassemble/fold down the seat and tiller (see section VII. “Disassembly”) as close as
possible to the loading area of the vehicle to be used for transporting your scooter.
• The degree to which you disassemble/fold your Carry On or fold the seat and tiller
depends on the size and shape of the cargo area of the transporting vehicle.
• Moving blankets or other forms of padding may be used to protect your Carry On
during transportation.
•
Do not
lift your Carry On by its plastic body parts, seat, or tiller. Breakage of these
parts is not covered by the warranty.
•
Do not
use the tires or wheels to lift the your Carry On. The tires may rotate and cause
injury or damage.
•
Only
lift your Carry On using the supplied handles. There are (2) side handles, (1) front
handle, and an underside handle pocket at the rear.
If your scooter and its components are not properly and securely
stowed during transportation, the scooter or the components may move or become
airborne and cause injury or damage.
Never sit on your Carry On when it is being transported. Secure
with an approved tie-down system.
Never transport your Carry On scooter on an outside lift. Remove
the seat or make sure the seat is as
down s e c u r ely with an approved
tie-down while transporting. Failure to do so could result in the seat coming loose
and becoming airborne. This situation could cause injury or damage.
