GM Electronics Ltd.
Golden Mask Deep Hunter pro2 – Instruction Manual
10
With the acquisition of some experience anyone can learn to recognize the
nature of the various signals, which will guide him in making better use of the
capabilities of the device. It depends to some extent and precise adjustment of
the ground balance and properly selected starting frequency sound indication.
8. The additional signal amplification ( "BOOST")
The additional amplification of the received signal provides increased depth of
detection, but its use is recommended only after acquiring some experience in
working with the unit.
After turning
"ON"
the
"BOOST"
set potentiometer
"SENSITIVITY"
to
"5"
. All settings are carried out as specified in item 4.
Turn clockwise
"SENSITIVITY"
to the highest value which is possible to
achieve the setting "threshold".
It should be recognized that setting the apparatus of "threshold" can be
performed by
"GROUND"
, and/or by
"SENSITIVITY"
, and depending on
whether it is included further amplification of the signal, the set-point will be
different.
Working with different values of
"SENSITIVITY"
, and using the extra gain
with
"BOOST
" assume different behavior of the device.
9. "Silent" mode
In
"silent"
mode detector can be switched with potentiometer
"CRACKLE
On/Off."
set to
"Off".
This
mode can be choose
at any time of searching
process.
In
"silent"
mode the crackles are not hear and presents of metal will be indicate
with dual tone -
"high"
- for
non-ferrous
metals and
"low" -
for ferrous
metals.
