background image

GM Electronics Ltd

 

                             Golden Mask Deep Hunter Mobile ST 

– Instruction manual

           

 

6.Indication of the presence of a metal object within the coil area: 

The signal from a metal object, located in the area of the search coil is 
indicated  by  increasing  the  frequency  of 

the  sound  signal  (“ticking” 

sound).  
 
Most  weak  signals  an  operator  is  able  to  notice  are  improved  by 
doubling  the  preset  frequency  of  the  sound,  which  is  set  with  the 

“AUDIO - Silent” 

knob. This is perceived accurately by the human ear 

and  therefore  it  needs  to  be  set  very  precisely,  so  that  the  sound 
frequency  without  the presence  of a signal  to be  only a  few  Hz  (slow 
“ticking” sound).  
 
Each 

“signal”  has  “start”  and  “end”.  The 

Golden  Mask  Deep  Hunter 

Mobile  ST 

has  a  very  well  expressed 

“zone”  indication  from  deeply 

buried metal objects. The length and width of this 

“zone” is a guide to 

the depth/size of the metal objects. When this length is greater than the 
size  of  the  search  coil  and  has  an  expressed  peak  in  the  middle  this 
certainly indicates a deeply buried metallic object. If the signal is of a 
short duration (small area), but is captured only in the central part of the 
coil,  then  you  can  also  expect  a  deeply  buried  metal  object.  Double 
audible responses corresponding to the passage of the front and rear 
ends of the coil over the metal object are a sure indication of relatively 
small metallic object not deeply buried. After reaching a certain signal 
strength  (which  will  be  indicated  on  the  indicator 

“SIGNAL”

),  the 

identification  of  the  type  of  metal  through  the  LEDs  mounted  in  the 
indicating 

“SIGNAL”

  will  start  to  work.  The  red  color  indicates  non-

ferrous metals and green indicates ferrous metals (iron). To present a 
high probability  of  proper  metal  type  identification,  when  you  detect  a 
target, move the coil outside the target area, press the 

“SMART TUNE”

 

button  and  then  pass  the  antenna  over  the  target  from  a  different 
direction. Repeat as many times as you want to identify the type of the 
metal  more  securely.  With  a  little  experience,  anyone  can  learn  to 
recognize the nature of the various signals, which will lead to better use 
of the great capabilities of the 

Golden Mask Deep Hunter Mobile ST.

 

 

 

Summary of Contents for Deep Hunter Mobile













Reviews: