5
Operating Instructions
Visually inspect the
Dynamic
Infrared Heater for any damages before operation. Do not
operate the heater if any damages are detected. Contact your dealer immediately.
NOTE: “UP” and “DOWN” arrow buttons on the control panel and remote control
have dual function capabilities.
Adjust TIME / TEMP with up arrow or adjust HI / LOW settings.
Adjust TIME / TEMP with down arrow or adjust
0
C/
0
F settings.
1) Plug the power cord directly into a conventional 120V 15 amp outlet and press the
MASTER POWER switch on the rear of the portable heater. Then press the POWER
button on the front control panel or on the remote to start the unit. The LED display will
show the default value as 72
0
F/22
0
C.
(Note: If the current ambient temperature is greater than the set temperature, the HI/LOW display,
fan, and Quartz Bulbs will not operate.)
2) By pressing the
0
C/
0
F/Down button, you can switch the temperature format from Fahrenheit
to Celsius and vice versa.
Function Display
Press the
0
C/
0
F/Down to
switch from Fahrenheit
to Celsius.
