background image

27 | 

P a g e

 

 

 

Ambulo

 

WARRANTY 

Our  products  are  warranted  against  defects  in  materials  and 
workmanship  for  a  period  of  two  years  from  the  date  of  purchase. The 
warranty period for a Golden Baby Ambulo carry cot is six months from 
date of purchase. If the product has a manufacturing fault we will repair it 
for free. If it is not practical to repair it we will, at our  discretion replace 
the part in question. If the product fails due to wear and tear,  accident, 
neglect or negligence, or is outside the warranty we will happily repair it 
for  a  reasonable  charge.  The  warranty  covers  the  original  purchaser 
buying  the  product  from  an  authorised  dealer.  Proof  of  purchase  is 
required.  The  warranty  covers  workmanship  or  materials  that  are 
deemed  faulty,  providing  the  pushchair  has  at  all  times  been  used  in 
normal  conditions,  in  accordance  with  your  instructions,  and  been 
properly maintained. The warranty does not cover second hand products, 
modified products, poorly maintained products, normal wear, fading and 
fabric  cuts,  improper  use  (by  way  of  example):  abnormal  use;  not 
following  your  instructions;  A  child  left  unattended;  safety  harness  not 
used;  excessive  load;  transport  damage  i.e.  airline  or  freight  damage. 
Customer  costs  within  the  warranty  include  inward  freight  charges  to 
return  the  product  to  the  manufacturer’s  representative  for  warranty 
and/or  service.  The  manufacturer’s  representative  reserves  the  right  to 
charge a service fee and/or charge for parts replaced/repaired. A return 
freight charge may apply.  
 
Exclusions 
Any consequential loss or damage to any person or property, directly or 
indirectly as a result of using this product.  
 
Please  discuss  any  warranty  or  service  queries  with  us.  You  will  be 
required to show proof of purchase. We will inform you of the next step. 
Products that are returned directly to the manufacturer by the customer 
will NOT be eligible for warranty. 
 
Please  register  your  product  purchase  by  returning  the  product 
registration form that is supplied in the packaging. Please be advised you 
need  to  register  your  serial  number  in  order  to  activate  your  two  year 
manufacturing  warranty.  Your  serial  number  can  be  found  on  the 
shopping basket bar of your stroller and on the base board of the carry 
cot. It’s a white label with a bar code and the serial number on.  
 
 
 

Summary of Contents for Ambulo




























Reviews: