background image

One year Warranty 

Your  Goldair  Venti  product  has  been 
inspected  and  tested  and  is  guaranteed 
subject  to  the  following  for  a  period  to  One 
year from the date of purchase against defects 
in  workmanship  and  materials.  During  this 
period,  such  defects  will  be  rectified  by  repair 
or  replacement  of  the  product  purchased. 
Your  product  contains  no  user  serviceable 
components  and  this  Warranty  becomes 
invalid  if  in  our  opinion  the  product  has  been 
misused, 

abused, 

incorrectly 

installed, 

tampered  with,  connected  to  an  electrical 
supply  not  corresponding  with  the  name  plate 
specification,  or  subjected  to  power  surges. 
The  Warranty  does  not  include  any  labour  or 
other  associated  expense  that  may  be 
involved  in  removal  or  installation  of  the 
product.  Normal  wear  and  tear  is  expressly 
excluded. 

If  your  Goldair  Venti  product  fails  to  operate 
satisfactorily,  please  return  it  to  the  retailer 
from  whom  it  was  purchased.  To  obtain  a 
repair  or  replacement  product  under  this 
Warranty, 

you 

will 

need 

to 

produce 

satisfactory evidence of date of purchase. The 
completed  Warranty  and  purchase  receipt 
must  be  presented  with  the  product.  The 
Warranty  should  be  filled  out  at  the  time  of 
purchase.  It  is  in  your  interest  to  make  sure 
this is done. 

 

 

If  the  product  is  to  be  replaced  (cannot  be 
repaired)  then  that  replacement  will  be  of  the 
same  or  similar  product  or  accessory 
excluding  packaging,  instruction  card  etc. 
Where a replacement product is supplied, this 
shall  be  guaranteed  for  the  balance  of  the 
original Warranty period. 

Any  model  that  is  no  longer  available  will  be 
replaced by a model of a value and  with such 
features  as  we  consider  appropriate  in  the 
circumstances.  Goldair  Venti  Ltd  is  not 
responsible  for  freight  forwarding  charges, 
losses or damage in transit. 

If service is required after the Warranty period 
has expired, the product should be returned to 
a  qualified  electrical  technician.  Service 
outside  of  the  Warranty  period  will  be  at  your 
cost. 

Consumers Guarantee Act (1993). 

In  accordance  with  the  above  act  consumers 
are  advised  that:  The  manufacturer  does  not 
undertake  that  repair  facilities  and  parts  are 
necessarily available for this product. 

If  any  of  the  provisions  of  the  foregoing  are 
contrary  to  any  relevant  legislation,  then  that 
provision shall be deemed to be excluded from 
the Warranty and the rest of the provisions will 
continue to apply. 

 

Name ……………………………………………… 

Address …………………………………………… 

………………………………………………………. 

Suburb …………………………………………… 

 

Purchased 

from ………………………………… 

Date of purchase ………………………………… 

Name of product ………………………………… 

Model no ……………………………………………

 

  

IMPORTANT: Please retain this Warranty card 

Summary of Contents for Venti GCPF110







Reviews: