background image

CAUTION:

In order to avoid a hazard due to inadvertent resetting of the

thermal cut-out, this appliance must not be supplied through an external
switching device, such as a timer, or connected to a circuit that is regularly
switched on and off by the utility.

General Care and Safety Guide

This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities or lack of experience and
knowledge, unless they are supervised or have been given instruction
concerning the use of the appliance by a person responsible for their safety.

Children should be supervised to ensure that they do not play with the
appliance.

If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualified persons in order to avoid a hazard.

Use only the voltage specified on the rating label of the appliance.

The heater must not be located immediately below a socket outlet.

This appliance is intended for household use only and not for commercial or
industrial use.

Indoor use only.

Use this appliance only as described in this manual. Any other use is not
recommended by the manufacturer and may cause fire, electric shock or
injury.

Always unplug appliance when not in use.

When the appliance has been unpacked, check it for transport damage and
ensure all parts have been delivered. If parts are missing or the appliance has
been damaged, contact the Customer Services Team.

Do not use if there are visible signs of damage to the blanket.

It is recommended that this Electric Blanket is plugged directly into the wall
socket.

A correctly specified, undamaged extension cord may be used with this
Electric Blanket provided it is used in a safe manner.

Do not operate with cord set coiled up as a heat build up is likely, which could
be sufficient to become a hazard.

Do not use heavy or dense over blankets as they may lead to overheating of
the Electric Blanket.

The power cord must be routed to the head of the bed to prevent being sat on
or rolled on when getting in and out of the bed.

YOUR SAFETY IS IMPORTANT TO US. PLEASE ENSURE YOU TAKE NOTE OF THE 

INSTRUCTIONS AND WARNINGS OUTLINED IN THIS MANUAL.

Summary of Contents for Select GSTD Series













Reviews: