background image

CAUTION:

In order to avoid a hazard due to inadvertent resetting of the

thermal cut-out, this appliance must not be supplied through an external
switching device, such as a timer, or connected to a circuit that is regularly
switched on and off by the utility.

This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities or lack of experience and
knowledge, unless they are supervised or have been given instruction
concerning the use of the appliance by a person responsible for their safety.

Children should be supervised to ensure that they do not play with the
appliance.

If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualified persons in order to avoid a hazard.

WARNING:

You must not cover this heater. Covering this heater presents

fire risk and will activate the safety fuse; permanently disabling the unit.

WARNING:

Do not use this heater in small rooms when they are occupied

by persons not capable of leaving the room on their own, unless constant
supervision is provided.

WARNING:

To reduce the risk of fire, keep textiles, curtains, or any

flammable material a minimum distance of 1 metre from the air outlet.

WARNING:

In order to avoid overheating or fire, do not cover the heater.

General Care and Safety Guide

YOUR SAFETY IS IMPORTANT TO US. PLEASE ENSURE YOU TAKE NOTE OF THE 

INSTRUCTIONS AND WARNINGS OUTLINED IN THIS MANUAL.

The heater must not be located immediately below a socket outlet.

Do not use the heater if it has been dropped or damaged.

Do not use if there are visible signs of damage to the heater.

Ensure heater is on a flat, stable, heat-resistant surface.

Do not use this appliance in the immediate surrounds of a bath, a shower, or a swimming
pool or other liquids.

Keep all objects at least 1 metre from the front and 150mm from the sides of the appliance.

This appliance is intended for household use only and not for commercial or industrial use.

Indoor use only.

Use only the voltage specified on the rating label of the appliance.

Use this appliance only as described in this manual. Any other use is not recommended by
the manufacturer and may cause fire, electric shock or injury.

The common cause of overheating is deposits of dust or fluff in the appliance. Ensure these
deposits are removed regularly by unplugging the appliance and vacuum cleaning the air
vents and grills.

Summary of Contents for Platinum HeatSmart GPPH710

























Reviews: